3 questions to help define the structural integrity of your hospital
Second in a series of excerpts from the free executive guide, “The Evolving Importance of Healthcare Resiliency: Preparing Your Hospital for a Crisis.”
By Mike Zorich
When natural disasters strike, hospitals and healthcare systems are on the front line of ensuring community safety and resiliency. However, this purpose can only be served if your hospital is prepared to face the worst. Natural disasters may be unstoppable, but that doesn’t mean your hospital can’t take intentional and necessary steps to lessen their impact. While the specific natural disasters you should be concerned about — and many of the specific actions you should take in response — depend on your geographic location, there’s no such thing as being too prepared.
While the structural and architectural design of your building doesn’t necessarily need to address every potential natural disaster, it should be able to withstand common events for your area, as well as potentially devastating, but unlikely chance occurrences, such as fire. In addition to establishing procedures and educating your staff on hospital policies in the event of these disasters, you should consider these questions:
Do you want your hospital to be a community beacon?
Assuming your hospital makes it through whatever disaster befalls your community, you’ll need to consider whether you want your hospital to become a community beacon – a place where communities often turn for safety and as a gathering place amid chaos and tragedy. It is not uncommon for people with nowhere else to go during a disaster to go to a hospital, even if they don’t need medical care.
If you do want your hospital to serve this purpose, you’ll need to enact procedures to ensure it is prepared to do so. First and foremost is the designation of a disaster response area – ideally one that is hardened against potential disaster effects and prepared to take on an influx of people.
Does the physical design of your building pose any challenges?
Consider how the layout of your building would function in a disaster. For instance, are your emergency generators or back-up fuel pumps in the basement? If so, this could leave your hospital without these critical systems in the event of a power outage if your basement experiences flooding. Also, consider the locations of the emergency exit stairwells in your building. Ideally, they should discharge into remote areas of your hospital that aren’t at high risk for damage or physical attack. In order to create safe fire exits, stairways should also be maintained with positive pressure from a clean source of air, which will help keep smoke and toxic fumes out.
Since there are numerous variables in the physical design of your building that could become hazardous during a natural disaster, the safest and most thorough course of action is to conduct a full building vulnerabilities assessment with a professional.
Is the hardness of your building prepared to handle adverse conditions?
During a natural disaster, your building could be subjected to high winds and substantial rains. By hardening your building to take on these outside forces, you can ensure critical areas remain safe and damage is minimized, allowing your hospital functions to continue. While building codes require your building be able to withstand a certain wind level, further hardening may be necessary if hurricanes and tornadoes are common in your area.
While many hospitals wait until it is too late to make structural changes designed to improve resiliency, there’s no such thing as being too prepared. Preemptively improving the resiliency of your hospital through architectural and structural changes can make all the difference in your facility’s ability to withstand a disaster.
Next month: The Effect of Disaster on Your Hospital’s MEP Infrastructure
Previously posted: Healthcare Resiliency: What it is and Why it’s Important
Download the entire executive guide, “The Evolving Importance of Healthcare Resiliency: Preparing Your Hospital for a Crisis.”