IMEG provided structural, mechanical, electrical, plumbing, and technology engineering design, along with construction phase services, for Phase 2 of the new VT Mobile Aerospace Engineering (VTMAE) Maintenance, Repair and Overhaul (MRO) Hangar adjacent to the hangar constructed in 2018. The site has airside access off Runway 17-35 and landside access off Langley Avenue via Merlion
Project Category: Airport
VTMAE MRO Hanger Facility Phase 1
IMEG provided structural, mechanical, electrical, plumbing, and technology engineering design, along with construction phase services, for Phase 1 of the new VT Mobile Aerospace Engineering (VTMAE) Maintenance, Repair and Overhaul (MRO) Hangar at the Pensacola International Airport. The new 173,500-sf hangar has two bays and can accommodate two of the largest version of the 777
Audio-Visual and Technology for New Facility
IMEG is providing technology engineering design services for the new 11,600-sf operations and communications center. The new facility will house the airport’s emergency operations center and emergency response team area. IMEG worked with airport staff to identify applications and procedures required between each dispatch workstation and large video walls. Once the applications were identified, programming
South Cargo Building Upgrades
IMEG is providing mechanical, electrical, plumbing, fire protection, and technology engineering design services for replacement of the HVAC equipment and fire protection systems throughout three cargo buildings at Logan Airport. Each project was designed to interface with other concurrent construction projects within the buildings. Detailed phasing plans were prepared, including temporary swing space, to allow
Airport Runway Rehabilitation Project
This busy airport airstrip was deteriorating and needed to be replaced. To proved a more long-term solution to runway maintenance, concrete was used to replace the rundown asphalt airstrip. For the first phase of this project, the airport was shut down in order for construction to happen quickly and reduce disruption of the overall service.
Multiple Design Services for Airport
IMEG provided engineering design and services for a variety of projects at the San Diego International Airport. IMEG provided design services for the Terminal 2 East improvements, which included additional power for the entire corridor, updated plumbing design for all restrooms, and lighting for the terminal. IMEG also provided electrical design services on the later
New Consolidated Rental Car Facility
IMEG provided HVAC, plumbing, and electrical engineering design for a 10,000-sf rental car quick-turn-around (QTA) building. The facility includes offices and service garage space for three rental car companies. The design included: Two-lane car wash Fueling islands Infrared radiant tube heating system providing heat for the garages Exhaust system with CO/NO2 monitoring system to ensure